Install Gantry.

Notes Before you start:

• You will need to remove the Y feet from Y rails at the front of the machine, in order to slide the gantry onto the Y Rails.
• IMPORTANT: Be sure to set your V-Wheels at their widest point before sliding the Gantry onto the Y Rails. Rotate the eccentric nuts to adjust spacing between V-Wheels.
• IMPORTANT: Adjust but do not over-tighten the V-Wheels after installing the gantry Carriage, tight enough to remove wobble in the X Carriage and no further. Over tightened V-Wheels will develop flat spots in just a few hours!
• There is only a single spare V-wheel in the kit, should you over tighten and damage the wheels more can be ordered here.